3 -17
(15) Cruise control lever (HST
Type)
For cruise control drive, push down the cruise
control lever with pressing the HST forward
pedal. And then, the HST pedal will be fixed at
that position and the driving speed of the tractor
will be maintained constantly.
To exit the cruise control drive;
1) Press down the brake pedal or
2) Press down the HST forward pedal little more.
And then, the HST forward pedal returns to the
neutral position and the cruise control drive will
be quitted.
▶ During the cruise control drive, do not press down the HST reverse pedal to exit
the cruise control drive or to reverse the tractor. After exiting the cruise control drive,
use the HST reverse pedal.
▶ DO NOT try to move the cruise control lever in order to exit the cruise control drive.
It may cause a failure of the cruise control linkage system.
warning
Cruise control lever
Cruise drive
Release
HST forward
pedal
(14) HST forward/reverse pedal
(HST type)
Press down the HST forward pedal slowly in
order to move the tractor forward.
If releasing the pedal, it returns back to the
neutral position and tractor will stop.
The deeper the pedal is pressed down, the
faster the tractor will drive.
The HST reverse pedal is worked in the same
way of the HST forward pedal operation.
HST
reverse
pedal
HST
forward
pedal
warning
▶ When releasing the HST pedal while driving in high speed, the braking distance
can be extended depending on the load conditions. At this time, press down the
brake pedal(s) to stop the tractor.
▶ DO NOT operate the HST pedal hastily. It may cause a shock to you.