3 -24
(18) Parking brake lever
This lever is used to apply the parking brake.
Before applying the parking brake, connect the
brake pedals each other with the brake pedal
latch.
To apply the parking brake, pull the parking
brake lever upward after pressing down the
brake pedals.
Release the brake pedals slowly with checking
slippage of the tractor.
To release the parking brake, just press the
brake pedals little harder and check if the
parking brake lever returns to its original position
by spring.
Parking brake lever
Brake pedals
Parking brake lever
Brake pedals
MEC
HST
PARK
PARK
Caution
▶ DO NOT drive the tractor with the parking brake engaged. It may cause damage of
the brake or parking brake system.