iP5AiP5A
Standard Specifications
LCD
32 character display
All units
keypad Download and Upload available
Remote cable
2m, 3m and 5m long keypad cable enables users
Optional
to control the drive from a distant area
DB resistor
To enhance the regenerative braking performance,
it makes the drive to accelerate/decelerate rapidly According to drive
DB unit
If it need a regenerative braking, it is used with DB resistor
capacity
Conduit for
Install it to fit for NEMA TYPE 1 Enclosure or IP20
15~90kW
NEMA TYPE 1 (20~125HP)
DEVICENET DEVICENET optional communication card
All series
(Above S/W V10)
PROFIBUS PROFIBUS optional communication card
All series
(Above S/W V10)
LS485/MODBUS_RTU LS485/MODBUS_RTU optional communication card
All series
(Above S/W V10)
LonWorks Lonworks optional communication card
All series
(Above S/W V10)
BACNet BACNet optional communication card
All series
(Above S/W V10)
MODBUS_TCP MODBUS_TCP optional communication card
All series
(Above S/W V10)
Metasys_N2 Metasys_N2 optional communication card
All series
(Above S/W V10)
CCLink CCLink optional communication card
All series
(Above S/W V10)
CANopen CANopen optional communication card
All series
(Above S/W V10)
Common Specifications (External)
Keypad
Remote
Dynamic braking
Conduit option
Communication
option card
12
To Next Page
Loading...
