LOADER INSTALLATION
◈ Position the loader on a hard level surface. The more level the surface the easier the loader is to install.
▶ IMPORTANT: Do not tighten any hardware until all components are attached onto the tractor.
CAUTION: Lift and support all loader components safely.
▶ Using a hoist, install Mounting Frame LH/RH.
(1) Mounting Frame LH-1EA
(2) Mounting Frame RH-1EA
(3) BACK AXLE -1EA
(4) UNDER PLATE-1EA
(5) BOLT, M10x40Lx1.25P-2EA
(6) SPRING WASHER, M10-2EA
(7) PLAIN WASHER, M10-2EA
(8) BOLT, M12x40L-2EA
(9) PLAIN WASHER, M12-4EA
(10) SPRING WASHER, M12-4EA
(11) NUT, M12-2EA
(12) BOLT, M12x50L-2EA
(13) BOLT, M14x45L-4EA
(14) SPRING WASHER, M14-22EA
(15) NUT, M14-4EA
(16) BOLT, M14x40L-2EA
(17) BOLT, M14x55L-4EA
(18) BOLT, M14x45Lx1.5P-2EA
(19) BOLT, M14x65Lx1.5P-6EA
To Next Page
Loading...
