EasyManuals Logo

LSI SAS 9300-8i User Manual

LSI SAS 9300-8i
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
LSI Corporation
- 6 -
LSI SAS 9300-8i PCI Express to 12Gb/s SAS Host Bus Adapter User Guide
March 2013
LSI SAS 9300-8i HBA Characteristics
Physical Characteristics
SATA+SAS Connector (J1). The LSI 12Gb/s SAS HBA supports SATA and SAS connectors through connectors that are
SFF-8643 mini-SAS HD, internal connectors.
5.4 Physical Characteristics
The LSI 12Gb/s SAS HBA is a 6.0-in. × 2.7-in., low-profile board. The component height on the top and bottom of the
LSI 12Gb/s SAS HBA is in accordance with the PCIe specification. The following figure shows the HBA board layout.
Figure 1 LSI SAS 9300-8i HBA Board Layout
EC1 – PCIe x8 board edge connector
CR1 – Heartbeat LED
J1 – SFF-8643 mini-SAS HD, internal, right-angle connectors
5.5 Electrical Characteristics
The maximum power requirements for the LSI 12Gb/s SAS HBA under normal operation are as follows:
PCIe 12.0 V = 1.59 A
Power values:
Nominal = 13.0 W
Worst case = 19.04 W
5.6 Thermal and Atmospheric Limits
The atmospheric limits for the LSI 12Gb/s SAS HBA are as follows:
Temperature range: 0 °C to 55 °C (32 °F to 131 °F) (dry bulb)
Relative humidity range: 5% to 90% noncondensing
Maximum dew point temperature: 32 °C (89.6 °F)
Minimum airflow: 200 linear feet per minute
฀฀



฀฀฀฀
฀฀฀฀


Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LSI SAS 9300-8i and is the answer not in the manual?

LSI SAS 9300-8i Specifications

General IconGeneral
InterfacePCIe 3.0 x8
SAS Ports8
SAS StandardSAS 3.0
Form FactorLow Profile
RAID SupportNo
Devices SupportedUp to 256 SAS/SATA devices
ControllerLSI SAS 3008
Data Transfer Rate12 Gbps per port
Connectors2 x SFF-8643
Operating System SupportWindows, Linux, VMware

Related product manuals