How to fix RS-485 communication error in LSIS Inverter?
To resolve an RS-485 communication error, ensure the converter has electric power. Verify that the master is polling the inverter. Check the wiring for Ground Fault (GF) and correct it according to section '11.3 Installation'. Set the correct value in accordance with '11.3 Installation'. Revise the User Program (Note1). Also, consult the converter manual for further guidance.
General safety guidelines and handling advice before operating the inverter.
Guidelines for safe and effective inverter installation, including environment and clearances.
Detailed procedures for changing parameter values for Accel time and Frequency settings.
Instructions for setting frequency via keypad and terminals, and basic operation sequences.
Control block diagram for acceleration, deceleration, and V/F control logic.
Configuration options for setting frequency reference via keypad, analog input, or communication.
Methods for controlling inverter operation (run, stop, direction) via keypad, terminals, or communication.
How to set acceleration, deceleration times, and choose acceleration/deceleration patterns.
Explanation of different V/F patterns (Linear, Square, User V/F) for voltage-frequency control.
Configuration of DC injection braking for stopping the motor and starting DC brake.
Configuring PID control for precise regulation of output frequency based on feedback.
Procedures for automatic measurement of motor parameters for optimal performance in advanced control modes.
Setting up and using Sensorless Vector Control for high-performance motor control without encoder feedback.
Enabling speed search function to detect motor speed during startup or power interruptions.
Configuring automatic restart attempts after faults to minimize downtime.
Performing self-diagnostics to check for internal faults like IGBT, phase, or ground issues.
Implementing overvoltage prevention and power braking during deceleration or stop.
Controlling external braking systems based on frequency and current thresholds.
Procedures for reading parameters from and writing parameters to the inverter using a remote keypad.
Resetting parameters to factory defaults and setting up password protection for parameters.
Reviewing current fault displays and accessing fault history logs for troubleshooting.
Setting up electronic thermal protection to prevent motor overheating based on current and time.
Configuring warning levels and trip behavior for motor overload conditions.
Enabling stall prevention to protect the motor from stalling during acceleration, constant run, or deceleration.
Descriptions of various protective functions and their corresponding keypad displays.
Troubleshooting guide for common faults, including causes and recommended remedies.
Safety warnings and precautions to be taken during inverter maintenance and inspection.
To Next Page
General
