LSIS XBF-DC04A - 4.14 Register U devices (Special module variable)

XGB Analog edition manual
Register the variables for each module referring to the special module information that is set in the I/O
parameter. The user can modify the variables and comments.
(1) Procedure
(a) Select the special module type in the [I/O Parameter Setting] window.
(b) Double click ‘Variable/Comment’ from the project window. .
(c) Select [Edit] – [Register U Device].
In case of IEC, select [Edit] – [Register special module variable]
4.14 Register U devices (Special module variable)
4 - 18