14
1. How to change user accounts?
Super Panel 4S has one standard user account only. The Super Panel 4S that has been
added needs to be deleted by the original owner before your login.
This manual is subject to changes without further notice. Product functions depend on the goods. Please feel free to
contact our official distributors if you have any question.
Attentions
FAQs
3. How to reset the device to factory defaults?
Use an ejection pin to long press the reset key for 6s and release it until the LOGO is
displayed on the screen. Within 30s, press the reset key again for 6s.When the system
restarts, it means the device has been reset to factory defaults.
2. How to restart the device?
Use an ejection pin to long press the reset key for 6s, and wait for the system to restart.
Products shall be installed by qualified professionals.
LTECH products are non-waterproof and not lightningproof (special models excepted). Please avoid
the sun and rain. When installed outdoors, please ensure they are mounted in a water proof enclosure
or in an area equipped with lightning protection devices.
Good heat dissipation will extend the working life of products. Please ensure good ventilation.
Please check if the working voltage used complies with the parameter requirements of products.
The diameter of wire used must be able to load the light fixtures you connect and ensure the firm wiring.
Before you power on products, please make sure all the wiring is correct in case of incorrect
connection that causes damage to light fixtures.
If a fault occurs, please do not attempt to fix products by yourself. If you have any question, please
contact your suppliers.
To Next Page
Loading...
Need help?
General
