T3
2.4G LED RGB Controller
1
2
Can RF remote control the functions of switch, pause, changing modes, changing speed and the brightness and so on. Built-in
32 changing modes, you can save the changing modes in the shortcut key as you like, which not only can call at any time, but
also can combine into a program to play in loop.
T3 is the 2.4GHZ RF wireless synchronization RGB controller which adopts LTECH multiple global initiate technology. The
control system consists of two parts, the RF remote control and receiver; realize the signal synchronization on unlimited
receivers within effective distance, a very good solution for the LED project needs sync control wirelessly. User-friendly full-color
touch wheel for color selection, unique LED state light for sync change indicated, user can simply know the LED working state
from distance by checking the remote control.
1. Technical Specs:
T3 2.4G LED RGB Controller Manual
LTECH
ZHUHAI LTECH ELECTRONIC TECHNOLOGY CO., LTD.
WWW.LTECHONLINE.COM
LT@LTECHONLINE.COM
Tel: +86 756 620 8823 Fax: +86 756 620 8833
Input Voltage: DC5V Built-in Lithium Battery
Working Current: ≤30mA
Working Frequency: 2.4GHZ
RF Remote Distance: 30m
Remote Option: Sync control unlimited receivers
Change mode: 32 Fantastic modes
T3 Remote Control
Battery Capacity: 1000mAh
Standby Time: ≤6 Months
Scale levels: 1024×1024×1024
Dimensions: L145×W55×H22(mm)
Package Size: L168×W102×H28(mm)
Weight (G.W.): 200g
T3 2.4G LED RGB Controller Manual
LTECH
T3
T3-CV T3-CCT3-5A
warranty
5 years
Input voltage: DC12V-DC24V
Max current load: 5A×3CH Max 15A
Max output power: 180W/360W(12V/24V)
Control button: 8 touch button
Compatible remote control: workable with T3, T3M, T3X
T3-5A CV Receiving controller
Working temperature: -30℃～55℃
Dimension: L211×W40×H30mm
Package size: L215×W42×H32mm
Weight (G.W.): 180g
Input voltage: DC12V-DC48V
Output voltage: DC3V-DC46V
Output current: CC 350/700/1050mA ×3CH
Output power: 1.05W~48.3W ×3CH Max 144.9W
Compatible remote control: T1/T2/T2M/T3/T3M/T3X
Working temperature: -30℃~55℃
Dimension: L175×W44×H30(mm)
Package size: L178×W48×H33mm
Weight (G.W.): 110g
T3-CC Receiving controller (current 3 in 1)
Input voltage: DC5V-DC24V
Max current load: 6A×3CH Max 18A
Max output power: 90W/216W/432W(5V/12V/24V)
Compatible remote control: T1/T2/T2M/T3/T3M/T3X
Working temperature: -30℃~55℃
Dimension: L175×W44×H30(mm)
Package size: L178×W48×H33mm
Weight (G.W.): 110g
T3-CV Receiving controller
2. Product Size:
55mm
145mm
22mm
4
0mm
1
6
m
m
15m
m
10mm10mm
2
03
m
m
2
0mm
211mm
3
0m
m
T3 RF remote control
175mm
44mm
170mm
30mm
T3-CV/T3-CCT3-5A
27mm
60mm
86mm
65mm
Remote holder
If you have to control many receivers synchronously, each receiver should be learning ID according to the above
steps learning ID.
3. The learning ID method of remote control:
T3-CC/T3-CV learning ID:
T3-CC/T3-CV cancelling ID:
1. Turn on the receiver and remote control.
2. Press “ID learning button” on the receiver more than 8 seconds, the buzzer beep twice, delete all the learned remote.
T3-5A learning ID:
T3-5A cancelling ID:
1. Turn on the receiver and remote control.
2. Press “on/off button” on the T3-5A for 2 seconds, there is a buzzer sound, and do not release your hand on the
button , at the same time press any keys on the remote control(except on/off key), until the green indicator light
of remote control flashes 3 times(the long buzzer ring at the same time), learning ID successful, release all the keys.
1. Turn on the receiver and remote control.
2. Press “on/off button” on the T3-5A for 2 seconds, there is a buzzer sound, and do not release your hand on the
button , after 5 seconds press any keys on the remote control(except on/off key), until the red indicator light of
remote control flashes 3 times(the long buzzer ring at the same time), release all the keys.
If you have to control many receivers synchronously, each receiver should be learning ID according to the above
steps learning ID.
1. Turn on the receiver and remote control.
2. Short press "ID learning button" on the T3-CC/T3-CV receiver, the running light keeps on, then long press any keys
(except on/off key)on the remote, the running light returns to flash (the buzzer long beep, the green light flashes 3
times), activated successful.
To Next Page
Need help?
General
