Ltech WiFi-104 User Manual

Group interface
Group operations in main interface
Group selection
Group name
Open the group
Zone selection
4.2.5 Mode Interface for RGB / RGBW Type
Mode
Changing
mode
Play single
mode
Speed
slider
Mode interface
Brightness
slider
Long
press
Short
press
Cycle play multiple modes
(speed & brightness is
unadjustable )
Type selection
(jumping/flash/
smooth/fade)
Choose the mode
to circle play
1
2
3
B. Learning ID:
C. Cancelling ID:
Long press” ID learning button” on the receiver for 5s, the buzzer long beep, ID cancelled.
[Attn]: Reset function is available during ID cancellation. Considering dysfunction in rare cases, please cancel
the ID and re-sync.
ID learning button
The running light
Zone number
Color screen
Short press "ID learning button" on the receiver, the running light keeps on, select the zone No. on
the App and touch the color screen for 2s-3s. The buzzer long beep (meanwhile the running light on the
receiver back to flash state), ID matched.
4.2.4 Group
Group Features：
Group
Choose several zones as one group and control in sync.
Max 3 groups, same LED types in one group and one zone could join multiple groups.
Enable the group status, the corresponding group will appear on the main interface.
Group settings will be auto off if zone LED type on off state changed.&
9
10
WiFi-104 LED Controller WiFi-104 LED Controller

Ltech WiFi-104 Specifications

General

Brand	Ltech
Model	WiFi-104
Category	Lighting Equipment
Language	English