LTS LTH-M201-C - Wiring Description; Door Lock Wiring

Video Intercom Main Unit·Quick Start Guide
3
No.
Interface
Description
B7
12V OUT
B8
GND
C
LAN
PoE Network Interface(Supports IEEE
802.3af/at-Compliant Devices)
2.2 Wiring Description
2.2.1 Door Lock Wiring
Figure 2-2 Door Lock Wiring
 Terminal NC1/COM is set as default for accessing magnetic lock/electric bolt; terminal
NO2/COM is set as default for accessing electric strike.
 Lock should be powered by itself. Max. voltage and current for relay is 30V and 1A.