Video Intercom Main Unit·Quick Start Guide
51
4 Remote Operation
4.1 Activate Device
You cannot use the door station until you activate it.
You can configure and operate the video intercom devices via NVMS7000.
Default parameters of door station are as follows:
Default IP Address: 192.0.0.65.
Default Port No.: 8000.
Default User Name: admin.
Steps:
1. Run NVMS7000, enter Device Management, check the Online Device area.
2. Select an inactivated device and click the Activate button.
3. Create a password, and confirm the password.
To Next Page
Loading...
