Video Intercom Main Unit·Quick Start Guide
37
The suggested length of cables left outside is 270 mm.
3. Pull out the cable through the cable hole of the left sticker.
Figure 3-46 Chisel Screw Hole
4. Remove the stickers and insert the expansion sleeves into the screw holes.
5. Thread the module-connecting line (400 mm) and grounding line across the thread
hole of both frames.
Figure 3-47 Place the Grounding Line and Module-Connecting Line
There are 6 module-connecting lines in the package: 190 mm *4 and 400 mm*2.
To Next Page
Loading...
