Video Intercom Main Unit·Quick Start Guide
48
Figure 3-62 Place the Grounding Line
The green-yellow line in the package is for grounding.
10. Connect wires and insert the modules.
a. Connect Cable 1 and one end of Cable 2 to the corresponding interfaces of the
Main Unit, then place the Main Unit into the upper grid of the left gang box.
b. Connect the other end of Cable 2 to the input interface of Sub Module 1. Connect
one end of Cable 3 to the output interface of Sub Module 1 and insert it into the
middle grid of the left gang box.
c. Finish the wiring and inserting according to the cable number and the position
shown as below.
To Next Page
Loading...
