LTS LTN8916-P16 - Page 12

Network Video Recorder Quick Start Guide
11
Figure 1. 5 LTN89XX
Figure 1. 6 LTN89XX-P16
Table 1. 4 Description of Rear Panel Interfaces
No.
Item
Description
1
LAN Interface
2 network interfaces
2
AUDIO OUT
RCA connector for audio output.
3
LINE IN
RCA connector for audio input.
4
HDMI
HDMI video output connector.
5
USB 3.0 interface
Universal Serial Bus (USB) ports for additional devices such as USB
mouse and USB Hard Disk Drive (HDD).
6
RS-232 Interface
Connector for RS-232 devices.
7
VGA
DB9 connector for VGA output. Display local video output and menu.
8
RS-485 Interface
Half-duplex connector for RS-485 devices.
9
ALARM IN
Connector for alarm input.
ALARM OUT
Connector for alarm output.
10
GROUND
Ground (needs to be connected when NVR starts up).
11
AC 100V ~ 240V
100V ~ 240VAC power supply.
12
Power Switch
Switch for turning on/off the device.
13
eSATA
Connects external SATA HDD, CD/DVD-RW.
14
Video Out
CVBS output
15
Network Interfaces with
PoE function (supported –P
series)
Network interfaces for the cameras and to provide power over
Ethernet.