Need help?Do you have a question about the LTS LTN8708K-P8 and is the answer not in the manual?
General| Model | LTN8708K-P8 |
|---|---|
| Channels | 8 |
| HDD Slots | 2 |
| Compression | H.265+/H.265/H.264+/H.264 |
| Audio Input | 1-ch, RCA (2.0 Vp-p, 1kΩ) |
| Audio Output | 1-ch, RCA (Linear, 1kΩ) |
| Power Consumption | ≤ 15W (without HDD) |
| Operating Humidity | 10% to 90% |
| Category | NVR |
| Type | NVR (Network Video Recorder) |
| Video Input | 8-ch IP video input |
| Video Output | HDMI, VGA |
| Resolution | Up to 4K |
| Network Interface | 1 RJ45 10/100/1000Mbps Ethernet port |
| USB Interface | 2 x USB 2.0 |
| PoE | 8 PoE ports |
| Operating Temperature | -10°C to +55°C (14°F to 131°F) |
Details the status indicators, IR receiver, USB ports, and control buttons on the front of the NVR.
Lists and describes the various interfaces on the rear panel, including audio, video, network, and power ports.
Provides guidelines for installing the NVR, covering rack mounting, cable routing, and environmental conditions.
Explains the step-by-step process for installing hard disk drives (HDDs) into the NVR.
Details how to wire alarm inputs/outputs and connect controllers using diagrams.
Offers a chart for estimating storage space requirements based on recording bit rate and duration.
Presents a visual overview of the NVR's menu hierarchy and available options.
Outlines the correct procedures for powering the NVR on and off to ensure optimal device lifespan.
Guides the user through the initial device activation and admin password setup.
Explains the process of logging into the NVR and the security implications of failed login attempts.
Describes how to use the Setup Wizard for initial configuration of system settings.
Details the configuration of network parameters, including IP address, subnet, and DNS settings.
Provides multiple methods for adding network cameras to the NVR for live view and recording.
Explains how to view live camera feeds and interpret status icons in the Live View mode.
Guides on configuring recording modes, such as continuous or motion detection, for cameras.
Describes how to access and play back recorded video files using various playback modes.
Guides on setting the admin password via web browser for initial device activation.
Explains how to log in to the NVR using a web browser after installation.
To Next Page
