Lucent Technologies DACS II - GT 1.3: Changing the Delay for DS3 Alarm Messages; GT 1.4: Querying the Delay for DS3 Alarm Messages; When to Use; Related Tasks

1-10
Issue 2.0 April 2000
365-353-255
DACS II Operation and Maintenance Manual
Release 8.2.6 Features
GT 1.4: Querying the Delay for DS3
Alarm Messages
When to use
Use this task to request the DS3 alarm delay time.
Related Tasks
For related tasks, refer to:
■ GT 1.3: Changing the Delay for DS3 Alarm Messages.
Ta s k
To query the DS3 alarm delay time, enter the following command:
RTRV-ALM-T3::::DS3ALM;
Where:
Stop! End of Task.
RTRV-ALM-T3
Retrieve alarm information
DS3ALM
DS3 alarm delay time