EasyManua.ls Logo

Lucent Technologies DACS II - Page 56

Lucent Technologies DACS II
62 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GL-2
Issue 2.0 April 2000
365-353-255
DACS II Operation and Maintenance ManualGlossary
D
DACS
Digital Access and Cross-Connect System.
Default
A value the system automatically uses for a parameter if you do not specify a value.
Demultiplexer
A device used with a multiplexed signal for recovering signals contained within it and restoring the
distinct individual channels of these signals.
DS0
Digital Signal Level 0 (64-kb/s).
DS1
Digital Signal Level 1 (1.544-Mb/s).
DS1 Data Rate
The DS1 Data Rate is calculated as follows: DS1 = (24 Channels x 8 bit/sample + 1 frame bit) x 8000
samples/sec DS1 = 193 x 8000 = 1.544 Mb/s.
DS1 Port
A DS1 port in either a DS1 interface module or a DS3 interface module.
DS3
Digital Signal Level 3.
DS3U
DS3 Unit.
E
E1 Data Rate
The E1 Data Rate is calculated as follows:
E1 = (32 Channels x 8 bit/sample) x 8000 samples/sec
E1 = 256 x 8000 = 2.048 Mb/s
With this data rate, 30 channels carry traffic and two channels are reserved; one channel contains
framing information and the other channel contains signaling information.