300 SERIES ADJUSTABLE BASE
OWNER'S MANUAL
15
14
Remote Control Pairing
OVERVIEW
The original remote that comes in the box is already paired to
the foundation. No further action is required.
In the event that the remote is not paired with the base, begin
by checking the following:
STEP 3, TO PAIR REMOTE:
Press and hold the HEAD CONTROL RAISE
and FOOT CONTROL RAISE buttons
simultaneously. Then ALSO press and hold
the blue button on the control box cord until
you hear 2 beeps. The remote is now paired.
Remote buttons highlighted
The blue pairing button can also be
used to lower the base to the at
position in case of an emergency.
i
STEP 1
Ensure the remote batteries are functioning. Replace if necessary.
STEP 2
Ensure the power cord is plugged in to a powered source.
To Next Page
Loading...
