Transporting the Drone
Drone Transportation Case
The Lucid C1 drone case is approximately 24” cubed. The case is waterproof and Lucid recommends you
have the drone in the case while traveling to and from a job site. When storing the drone in your office or
indoors, we recommend a secure location.
Note: When transporting the Lucid C1 drone in the case, secure the case so it cannot move around. For
example, do not put the case in the back of a trailer and allow it to bounce around.
Excessive vibrations will cause problems with the drone.
Drone Transportation Wagon (If Purchased)
The transportation wagon should be loaded with all of the accessories needed on a job site. This includes:
1. Batteries
2. Battery Charger
3. Remote Controller
4. Cones, Tape, High Vis Vest, Protective Equipment
Customer Repair Kit
Customer repair kit is offered to clients to provide tools to make on the job adjustments easier. In addition,
Lucid has provided additional propellers and accessories to aid in the maintenance of the aircraft.
Customer Repair Kit Includes (If Purchased)
1. 1.5mm Hex Key
2. 2mm Hex Key
3. 2.5mm Hex Key (Most uses)
4. Loctite Screw Adhesive
5. 3m Adhesive Mountain Pads (10)
6. Level
7. M3 x 8mm screws (10)
8. Spare CW Propeller
9. Spare CCW Propeller
To Next Page
Loading...