Prior to takeoff, GPS antennas must be attached to the drone in order to takeoff.
Remote Controller
The C1 cleaning drone comes with an H16 Remote Controller which the drone pilot will use to control the
drone. The remote controller allows the pilot to actuate the aircraft, control obstacle avoidance, view the
camera feed and provide live telemetry from the aircraft.
The remote control comes with a built in tablet displaying flight-necessary information in real time. During
flight, pilots are informed of their altitude, heading, distance, GPS data, camera view and current battery status.
The Remote Control will come in a grey case to protect the buttons and sticks. Never store or transport the
remote control, unless it is in the case. If the control sticks rest against anything, it can throw them out of
balance. The sticks will no longer be at zero and cause permanent damage to the remote.
Controller Case Includes:
1. Remote Controller
2. USB-C Wall Charger
3. USB-C Charging Cords
4. Neck Strap
5. Antenna Covers
6. GPS Antennas (as discussed above)
To Next Page
Loading...