Need help?Do you have a question about the Lucky FF718LiC-W and is the answer not in the manual?
General| Brand | Lucky |
|---|---|
| Model | FF718LiC-W |
| Category | Fish Finder |
| Language | English |
Explains how to use the wireless sonar sensor by attaching it to fishing line and casting.
Details how to tie the line to the sensor and use it as a float.
Covers battery replacement and power management for the wireless sonar sensor.
Describes the underwater information displayed and its components.
Explains the procedure to turn the FF718LiC-W fish finder on and off.
Allows selection between Wireless and Simulation modes for the fish finder.
Controls the detail shown on the display by adjusting sonar return visibility.
Sets the depth range for display, with automatic or manual options.
Magnifies the area around the bottom to reveal fish and structure.
Sets an audible alarm for when a specific depth is reached or exceeded.
Displays fish symbols based on advanced signal processing.
Activates an audible alarm when specific fish types are detected.
Selects depth units (Feet or Meter) and temperature units (°C or °F).
Allows selection of display color schemes: BLUE, ORANGE, or GREY.
Sets an alarm for low battery voltage levels.
Provides a choice from 20 different language options for the interface.
Adjusts the backlight level for visibility, especially during night fishing.
Controls the speed at which sonar data is displayed on the chart.
Provides procedures for general unit maintenance and sensor care.
Addresses common problems like signal loss, erratic readings, and display issues.
Lists technical details of the fish finder and wireless sonar sensor.
To Next Page
