Need help?Do you have a question about the Lucky FF918C Series and is the answer not in the manual?
General| Brand | Lucky |
|---|---|
| Model | FF918C Series |
| Category | Fish Finder |
| Language | English |
Details the various indicators and graphical representations on the fish finder screen, including depth, temperature, and fish icons.
Explains initial selection between normal water use (Start Up) and learning mode (Simulation) upon powering on.
Allows switching between different operational modes, such as Wireless or Simulation.
Controls the detail level shown on the display by adjusting sonar return sensitivity.
Sets the minimum depth displayed, with an automatic option to follow the bottom contour.
Sets the maximum depth displayed, useful for magnifying bottom areas or normal operation.
Configures an audible alert when the water depth reaches or falls below a specified level.
Determines if the display shows raw sonar data or interpreted fish symbols based on signal processing.
Activates an audible alarm when specific fish sizes (large, medium, all) are detected.
Allows selection of units for depth (meters/feet) and temperature (Celsius/Fahrenheit).
Chooses the color scheme used to represent bottom composition and water structure.
Sets a voltage threshold for an audible warning when the battery level is low.
Provides options to change the device's display language from a list of twenty-two choices.
Adjusts the screen backlight intensity for optimal viewing, especially during night use.
Controls how fast the sonar data scrolls across the screen, from slowest to fastest.
Provides guidance on cleaning and caring for the fish finder to ensure optimal performance and longevity.
Addresses problems with losing wireless signal, display freezing, or 'NO SIGNAL' indicators.
Explains erratic readings in shallow water and limitations for use in pools or enclosed water bodies.
To Next Page
