Ludlum Measurements 375 - Printer DIP Switch Settings

Models 375 (Including Series One), 375/1, 375/2 & 375/4 Section 5
Ludlum Measurements, Inc. Page 5-6 May 2017
RS-232 Data Format:
The data will be sent to the RS-232 port as:
Byte 1 0 x Byte 18 Space (20H)
Byte 2 x x Byte 19 H
Byte 3 x OR x Byte 20 H
Byte 4 x x Byte 21 :
Byte 5 . . Byte 22 M
Byte 6 x 0 Byte 23 M
Byte 7 Space (20H) Byte 24 :
Byte 8 Space (20H) Byte 25 S
Byte 9 Space (20H) Byte 26 S
Byte 10 M Byte 27 Space (20H)
Byte 11 M Byte 28 A Space
Byte 12 / Byte 29 L F
Byte 13 D Byte 30 A OR A
Byte 14 D Byte 31 R I
Byte 15 / Byte 32 M L
Byte 16 Y Byte 33 Carriage Return (0DH)
Byte 17 Y Byte 34 Line Feed (0AH)
Example Output:
0642.1 04/21/95 16:56:24 ALARM
0000.0 04/21/95 08:32:16 FAIL
Printer DIP Switch Settings
Citizen Dot Matrix Printer Model CBM-910 Type II
Please refer to page 32 of the printer user’s manual for the location of the
DIP Switches. Switches 2, 3, and 6 should be in the ON position (toward the
back of the printer). Switches 1, 4, 5, 7, and 8 should be in the OFF position
(toward the front of the printer).