EasyManuals Logo

LulzBot Mini Quick Start Guide

LulzBot Mini
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
7
Lower the Hinged Idler and Remove Loaded Filament
STEP
7a Locate the tool head of your LulzBot Mini. Using the idler retainer, compress the springs with
your thumb and slide up, allowing the hinged idler to move freely. Then lower the hinged idler
counter-clockwise.
Idler Retainer
Hinged Idler

Other manuals for LulzBot Mini

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LulzBot Mini and is the answer not in the manual?

LulzBot Mini Specifications

General IconGeneral
TweezersYes
CertificationCE, FCC, WEEE
Product colorBlack, Green
Viewing windowNo
Maximum print platform temperature120 °C
Package weight11330 g
AC input voltage100/240 V
Power consumption (typical)150 W
Print technology-
Printing materialABS, HIPS, Nylon, PVA, Polycarbonate (PC), Polylactic acid (PLA)
Layer thickness (max)0.5 mm
Layer thickness (min)0.05 mm
Maximum build size (WxDxH)152 x 152 x 158 mm
Filament thickness supported3 mm
Maximum vertical build speed275 mm/sec
Printing compartment volume3.65 L
Weight and Dimensions IconWeight and Dimensions
Depth435 mm
Width340 mm
Height385 mm
Weight8550 g

Related product manuals