Need help?Do you have a question about the LulzBot Mini 2 and is the answer not in the manual?
General| Filament Diameter | 2.85 mm |
|---|---|
| Nozzle Diameter | 0.5 mm |
| Print Speed | Up to 275 mm/s |
| Connectivity | USB, SD Card |
| Software | Cura LulzBot Edition |
| Operating System Compatibility | Windows, macOS, Linux |
| Build Volume | 160 mm x 160 mm x 180 mm |
| Layer Resolution | 0.05 mm - 0.4 mm |
| Supported Materials | PLA, ABS, TPU, Nylon |
| Print Surface | Heated borosilicate glass/PEI |
| Bed Leveling | Automatic |
| Power Requirements | 100 - 240 VAC |
| Printer Dimensions | 340mm x 385mm |
Details potential dangers like electric shock, burns, fire, pinch points, and age-related risks.
Covers FCC, Industry Canada, and Australian Communications regulatory statements.
Introduces software like Cura LE, OctoPrint, and MatterControl for printer operation.
Explains CAD tools such as FreeCAD, OpenSCAD, and Blender for model creation.
Guides through installation, driver setup, and initial use of Cura LulzBot Edition.
Explains the layout, view controls, and model manipulation tools in Cura LE.
Details options for selecting printers, materials, profiles, and print parameters.
Classifies filaments by skill level and describes various material properties.
Provides extrusion temps, bed temps, and removal tips for PLA, ABS, Nylon, etc.
Describes different print quality profiles (Standard, High Detail, High Speed) and custom settings.
Explains infill, support generation, and build plate adhesion methods like skirt, brim, raft.
Covers exporting files to SD cards or printing directly via USB.
Details the interface for monitoring print progress and controlling the printer.
Introduces the Graphical LCD Controller and its menu system.
Covers Z-offset, acceleration, jerk, and speed calibration via GLCD.
Instructions for starting prints, manual movements, and tuning via GLCD.
Covers monthly, semi-monthly, and quarterly cleaning and checks.
Instructions for removing dust from cooling fans and the control box.
Covers nozzle replacement procedure and associated warnings.
Provides steps for updating the printer's firmware.
Guides on setting the nozzle height for the first layer via GLCD and Cura LE.
Tips for ensuring prints adhere to the PEI print surface.
Information on using smaller diameter filament and related considerations.
Links to download servers and available open-source hardware files.
Definitions of common terms used in 3D printing.
Contact info for technical support and links to user forums.
Details on standard, extended warranties, and modification policies.
Company contact details, regional phone numbers, and website links.
To Next Page
