Need help?Do you have a question about the LulzBot TAZ 6 and is the answer not in the manual?
General| Print technology | Fused Filament Fabrication (FFF) |
|---|---|
| Printing material | ABS, HIPS, Nylon, PVA, Polycarbonate (PC), Polylactic acid (PLA) |
| Layer thickness (max) | 0.4 mm |
| Layer thickness (min) | 0.05 mm |
| Number of printing colors | - |
| Maximum build size (WxDxH) | 280 x 280 x 250 mm |
| Filament thickness supported | 2.85 mm |
| Maximum vertical build speed | 200 mm/sec |
| Printing compartment volume | 19.6 L |
| Certification | CE, FCC, WEEE |
| Product color | Black, Green |
| Viewing window | No |
| Heated print platform | Yes |
| Maximum print platform temperature | 120 °C |
| Package weight | 19500 g |
| AC input voltage | 100/240 V |
| AC input frequency | 50 - 60 Hz |
| Compatible memory cards | SD |
Weight and Dimensions| Depth | 820 mm |
|---|---|
| Width | 520 mm |
| Height | 630 mm |
| Weight | 14970 g |
General safety guidelines and precautions for operating the 3D printer.
Critical instructions to read before unpacking and powering up the printer.
Details potential hazards like electric shock, burns, fire, and pinching.
Details how to download and set up Cura LulzBot Edition for the first time.
Guides on automatic bed leveling, printing from SD/USB, and pausing prints.
Instructions on safely removing completed prints from the build surface.
Introduces full settings and details basic configuration options like layer height and fill density.
Guides on transferring files to SD card and starting prints via the GLCD.
Crucial warning about modifications voiding the warranty and potential damage.
To Next Page
