LulzBot TAZ 6 - Basic Tab Options; Differences in Layer Height

Cura LulzBot Edition
quickprint settings over to allow adjustments if one is selected. IF A
QUICKPRINT PROFILE IS NOT AVAILABLE, YOU WILL NEED TO
MANUALLY LOAD ONE IN. We recommend using our tested proles
that are available here: https://www.lulzbot.com/cura. You will want
to choose the prole that matches your lament and quality needs. Once
downloaded, you can load the le into Cura by selecting File > Open
Profile. This will automatically update all of your Cura settings for use
with your specic lament.
2.7 Basic Tab Options
Layer Height
The thickness of each printed layer is known as the “Layer Height”. The
smaller the layer height, the smoother curves will appear. Larger layer
heights are better for bridging and overhangs. Smaller layer heights will
also increase print time, as it will take more layers to complete the object.
Figure 2.14: Dierences in Layer Height
32
PROOF