59
Source
Aleph Objects, Inc., the maker of the LulzBot Mini 2 3D Printer, completely supports Free Soft-
ware, Libre Innovation, and Open Source Hardware. Along with the LulzBot Mini 2 3D printer
being a Free Software and Open Source Hardware design, it has been tested to work with 100%
Free/Libre Software. Our source code and design files are hosted on:
• LulzBot Download Server (static archive): Download.LulzBot.com
• LulzBot Development Server (files may change without notice): Devel.LulzBot.com
• Aleph Objects Code Repository https://gitlab.com/lulzbot3d
The LulzBot Mini 2 3D Printer is a Free Software and Open Source Hardware design. All of the
source files are available at http://download.lulzbot.com/Mini/2.0.0/ including:
• The latest version of this document, with HTML source code.
• 3D models and print files for all of the 3D printed parts in .stl, .gcode, and other original
source files.
• Calibration objects and sample prints.
• Design files for all electronics and machined parts.
LulzBot Aerostruder Tool Head
Einsy Retro control electronics
Graphical LCD Controller
Various spec sheets
• Bill of materials including every part needed to build the printer.
LulzBot Mini 2
LulzBot Aerostruder Tool Head
Graphical LCD Controller
• Drawings of components.
Sheet Metal
LulzBot Aerostruder Tool Head
Bed plate
Graphical LCD Controller
• Software binaries and source code for GNU/Linux and others.
Cura LulzBot Edition
Marlin Firmware
• Cura LulzBot Edition Print Profiles (vendor- and filament-specific configuration files).
LulzBot.com/Cura
To Next Page
Loading...
Need help?
General
