LulzBot Mini Quick Start Guide

Visit LulzBot.com/Cura to find download and installation instructions for Cura LulzBot Edition,
the software that will control your 3D printer. Even if you already have Cura installed on your
computer, visit LulzBot.com/Cura anyway to get the latest version.
2
Download and Install the Software for Your LulzBot Mini
Unable to download Cura from the Internet? You can also find download packages on the included
USB Thumb Drive that comes with your LulzBot Mini.
STEP
i

LulzBot Mini Specifications

General

Tweezers	Yes
Certification	CE, FCC, WEEE
Product color	Black, Green
Viewing window	No
Maximum print platform temperature	120 °C
Package weight	11330 g
AC input voltage	100/240 V
Power consumption (typical)	150 W
Print technology	-
Printing material	ABS, HIPS, Nylon, PVA, Polycarbonate (PC), Polylactic acid (PLA)
Layer thickness (max)	0.5 mm
Layer thickness (min)	0.05 mm
Maximum build size (WxDxH)	152 x 152 x 158 mm
Filament thickness supported	3 mm
Maximum vertical build speed	275 mm/sec
Printing compartment volume	3.65 L

Weight and Dimensions

Depth	435 mm
Width	340 mm
Height	385 mm
Weight	8550 g