Section Contents
1. Introduction
2. Communication Parameter selection screen
2.1 Address Setting
2.2 RS 485 Baud rate
2.3 RS 485 Parity
2.4 Quit Communication Parameters
3. RS 485 ( ModBus ) Output
3.1 Accessing 3X and 4X registers for Reading Measured values
3.2 Accessing 4X register for Reading & Writing Settings
3.3 User Assignable Modbus Registers
4. Datalogging
4.1 Event Based Datalogging
4.2 Time Based Datalogging
4.3 Load Profile Datalogging
5. Connection for RS 485
1
To Next Page
Loading...
