EasyManua.ls Logo

Lumel P20 - Analog output overflow configuration

Lumel P20
20 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
Input parameters:
- resistance of voltage input [V] > 1 MW
- resistance of current input [mA] 12 W ±1%
Sustained overload:
- TC and RTD 1.1 X
n
- voltage, current and resistance 1.3 X
n
Short duration overload:
- voltage input 5 U
n
- current input 10 I
n
Ensured protection level
acc. to EN 60529:
- housing IP 40
- from terminal side IP 20
Dimensions: 22.5 ´ 100 ´ 120 mm
Weight: 0.125 kg
Fitting on a 35 mm DIN rail,
acc. to EN 60715
Electromagnetic compatibility:
- noise immunity EN 61000-6-2
- noise emission EN 61000-6-4
Safety requirements acc. to EN 61010-1:
- installation category III
- pollution degree 2
- phase-to-earth working voltage:
- supply 300 V
2)
- input 50 V
- output 50 V
- altitude above sea level < 2000 m
1)

class – see table 3
2)
Execution for supply voltage 230 V.
EN

Other manuals for Lumel P20

Related product manuals