Lumens VC-A20P - Hardware Configuration and Troubleshooting; DIP Switch and RS-422 Configuration

English - 34
7.2.11 Setting- Network and Port Setting
1. Network address of camera: Change of setting is available only when DHCP function of camera is
turned off; please turn off DHCP function using VC-A20P screen menu, and for setting of each item
of screen menu, see 5.2 Setting Menu
2. Set RTMP: Set connection address of RTMP depending on RTMP Server setting
3. Set RTSP: Enable/Disable Multicast
<Remark> It is suggested to enable Multicast when the number of users online watching the live
image simultaneously is more than 4.
4. Set SNTP: Set SNTP Server IP
5. Set HTTP port. The default Port value is 80
<Remark> Change of setting is available only when DHCP function of camera is closed
6. Preset Save
1
2
4
3
5
6