English - 7
Chapter 4 Instruction for installation
4.1 Preparation before installation
Installation and connection of VC-A20P HD camera requires special skills. To install by yourself, please
follow necessary steps, ensure steady and tight installation of the device, and pay attention to your safety
to avoid any accident.
4.1.1 Ensure the safety of the installation environment. Please do not install the device on
unstable ceiling or in a place where the device is in danger of falling to avoid any accident.
4.1.2 Please check whether accessories in the box are complete or not. Please contact the
supplier for any shortage, and make sure to keep the accessories in the box intact.
4.1.3 Please choose a proper place for installation of VC-A20P in advance. Please determine an
installation place according to the following requirements.
4.1.1.1 Confirm the position for the object to be captured.
4.1.1.2 Confirm whether the VC-A20P is set at a proper distance from other light sources.
4.2 Instruction for installation
4.2.1 I would like to install VC-A20P on the desk
4.2.1.1 Precautions for installation
Please install the machine on a flat desk
Do not grab the camera head by hand when handling the device
Do not rotate the camera head by hand. Improper rotation may result in breakdown of the camera
4.2.1.2
Installation steps
1. Please adjust DIP switch at first prior to installation
<Remark> Please refer to Chapter 8 DIP Switch Setting for the relevant descriptions on DIP
switch.
2. Place the camera on a flat desk directly to ensure the normal vertical and horizontal operation of the
machine
To Next Page
Need help?
General
