Lumens VC-R30 User Manual

English-11
1st Level
Major Items
2nd Level
Minor Items
3rd Level
Adjustment Values
Function Descriptions
Gamma
0~ A ~3
Adjustable when the Image Mode is
set to Custom
Sharpness
0~A~14
Adjustable when the Image Mode is
set to Custom
Pan Tilt
Zoom)
Pan/Tilt Limit
On/Off
Turn on/off the angle limit setting
Pan Right Limit
0~170
Limit the right angle
Pan Left Limit
-170~0
Limit the left angle
Tilt UP Limit
0~90
Limit the upward angle
Tilt Down Limit
-30~0
Limit the downward angle
Pan Flip
On/Off
After it is activated, the Pan command
will be reverse
Tilt Flip
On/Off
After it is activated, the Tilt command
will be reverse
Preset Speed
5/ 25/ 50/ 80/ 120 deg/sec
Set the rotation speed of the cradle
head when Preset is executed
PTZ Speed Comp
On/Off
After it is activated, the Pan/Tilt moving
speed will vary from the zoom position
D-Zoom Limit
x1~x12
Set the D-zoom limit
D-Effect
Mirror
Off/ Mirror/ Flip/ Mirror+Flip
Set the mode at which the image is
turned
Auto Focus
AF Sensitivity
Low/ Middle/ High
For AF triggering speed, the higher the
sensitivity is, the faster AF is triggered
AF Frame
Center/ Full Frame/ Auto
AF frame setting, when Center was set
as AF frame, focusing will be on the
center of the screen. When Full Frame
was set as AF frame, focusing will be
calculated based on the full screen
PTZ Assist
On/Off
This function can only be enabled in
the Manual Focus (MF) mode
When PTZ Assist is enabled and PTZ
control is in operation, the focus will be
triggered. The focus will not be
triggered when the scene changes
Ethernet
DHCP
On/Off
Enable/Disable the dynamic host
configuration
IP Address
192.168.100.100
Configurable when DHCP is set to Off
Subnet mask
255.255.255.0
Gateway
192.168.100.254
Audio
Audio Enable
On/Off
Turn on/off audio output
Audio Volume
0~A~10
Volume Setting

Lumens VC-R30 Specifications

General

Brand	Lumens
Model	VC-R30
Category	Camcorder
Language	English