The user may customize his/her desired image mode
Gamma Level adjustment; Adjustable when the image mode is set to
Custom
3D noise reduction settings
Brightness adjustment of the image; Adjustable when the image mode is
set to Custom
Hue adjustment of the image; Adjustable when the image mode is set to
Custom
Saturation adjustment of the image; Adjustable when the image mode is
set to Custom
Sharpness adjustment of the image; Adjustable when the image mode is
set to Custom
5.3.7 System Settings – Output Setting
Change camera name here
Supporting 1 - 12 characters for the camera name
Please mix uppercase and lowercase letters or numbers for
characters. Special symbols such as “/” and “space” cannot be used
Modify the location of the camera, such as Room 1
Supporting 1 - 12 characters for the camera location
Please mix uppercase and lowercase letters or numbers for
characters. Special symbols such as “/” and “space” cannot be used
Set the resolution of the camera
After switching the resolution, the camera will restart. Please refresh the
browser
After the setting has been modified, select this button to apply the setting