RJ4700-INS-LAB-RevB12
4
Fasten each snap on front and back of rollator to secure
the pouch to the seat frame tubes as shown in g. 5.
Install both ends of back bar into frame back bar
receptacles as shown in g. 6; push down until both
locking buttons snap into place.
Stand behind your Rollator with a hand placed securely
on each handgrip. Move your Rollator slowly forward
and select a pace that is comfortable for you. Always
be sure the rear wheels are a few inches ahead of your
body.
The Rollator has loop locking hand brakes. To slow
down, squeeze the hand brakes upward toward the
handgrips. To hold the Rollator in a stationary position,
push the hand brakes down, away from the handgrips,
until the hand brakes lock into place; the rear wheels
will be locked in place in parked position. To release,
pull the hand brakes upward toward the handles until
the rear wheels move freely.
rest
seat
handgrip
locking
hand brake
folding
pull strap
frame back bar
receptacle
back bar
locking button
back bar
seat
pouchseat frame tube snap
To Next Page
Loading...
Need help?
General
