Need help?Do you have a question about the Lumiax Magic-E Series and is the answer not in the manual?
General safety instructions and symbols used in the manual.
Manufacturer's disclaimer for damages and system malfunctions.
Explanation of Maximum Power Point Tracking technology and its benefits.
Benefits of MPPT for high voltage arrays and grid-tie modules.
Comparison of MPPT controllers with traditional PWM controllers.
Factors affecting MPPT efficiency, such as high temperatures.
Detailed explanation of the 4-stage MPPT battery charging algorithm.
Identification and description of the controller's main components and features.
Details on the temperature sensor and its function for compensation.
Information about the RS485 communication port and its RJ11 interface definition.
Details on optional accessories like Bluetooth and IoT communication.
Important precautions and guidelines before installing the solar charge controller.
Recommendations for selecting a suitable and safe installation location.
Table detailing wire size recommendations for solar, battery, and load connections.
Step-by-step guide for connecting solar modules, battery, and loads.
Guidelines for proper grounding of the controller, especially for common-negative systems.
Description of icons and status indicators on the controller's LCD screen.
Detailed explanation of various icons and their corresponding statuses on the LCD.
Illustrations showing the automatic cycling of information on the LCD display.
Instructions on how to manually navigate through the LCD display screens using the OK button.
List of fault codes, their icons, and descriptions for troubleshooting.
Explanation of the functions of the MENU and OK buttons for operating the controller.
Overview of how to access and set various controller parameters.
Details on setting the low voltage protection levels for different battery types.
Setting the voltage levels for reconnecting the battery after low voltage protection.
Procedure to clear the Bluetooth password set via the mobile app.
How to select and set the battery type (GEL, Liquid, AGM, Lithium).
Configuration options for load control modes.
Details on Dusk to Dawn and Evening load control modes.
Manual control mode for the load output.
Efficiency curves for 12V systems with different solar module MPP voltages.
Efficiency curves for 24V systems with different solar module MPP voltages.
To Next Page
General