EasyManua.ls Logo

Lunos Skalar Series - User Manual

Lunos Skalar Series
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
Silvento concealed variant clamped-ventilator
- Replaces Skalar-; Skalar-V...; Skalar-2V... -
Installation directions
- Please pass on to the user -
Ventilator installation
as extractor hood is
not permitted here
The German VDE 100
regulation permits installa-
tion in bath and shower
room area 1.
Ventilator
Area 1
Area 2
2.25 mm
Ar
e
a
0
Contents:
Notes on these installation instructions
Safety precautions
Technical specifications, waste disposal
Dimensional drawings
Possible installation positions
Installation examples
Parts supplied
Dismounting „Skalar“ and installation also in new constructions
Electrical connection, wiring diagrams
Run-out setting
Filter change, cleaning
Accessory and replacement parts
Page:
1
1
2
3
3
4
5
5-7
8-9
10
10
10
Notes on these instructions
Read these instructions carefully and completely prior to starting installation! The general safety precautions and
safety symbols with notes in the text must be observed
When installation has been completed, pass these directions on to the user (renter, owner, block manager or
other)
Symbols in these directions:
Danger! Assembly work is only to be carried out on the ventilator when it is separated from the line voltage!
The ventilator is protectively insulated to protective class II, the protective conductor is not needed!
This symbol warns on danger of injury
This symbol warns on danger of injury by electricity
Safety precautions
Caution! Electrical connection is only to be made by authorised skilled personnel and under observance of
current VDE 0100 regulations of the German Electrical Engineering Association!
Caution! This piece of equipment is not to be operated (filter change, cleaning) by children or persons who
cannot operate it properly because of their physical, sensorial or mental ability, or their inexperience or lack of
appropriate knowledge.
Ventilators involved in off-air exhaust must always be supplied with a functioning flow-in of outside air.
Question and Answer IconNeed help?

Do you have a question about the Lunos Skalar Series and is the answer not in the manual?

Summary

Safety and General Information

Symbols in these directions

Explains warning symbols used in the manual for safety.

Safety Precautions

Key safety warnings and guidelines for installation and operation.

Technical Specifications

Electrical Connections

Details voltage supply, control voltage, protection class, and type.

General Performance Data

Covers performance specs like flow, power consumption, sound pressure level, and sensors.

Waste Disposal

Dimensional Drawings

Duct Mounting Positioning

Illustrates how to position the unit for duct mounting.

Installation Examples

Parts, Disassembly, and Installation

Parts Supplied

Lists all components included in the package for completeness check.

Disassembly of Skalar

Step-by-step guide to remove the old "Skalar" unit.

Assembly and Installation

Instructions for mounting the new unit, including connection to main line.

Installation Steps

Mains Connection and Wall Cut-out

Details electrical connection and fitting the unit into the wall cut-out.

Housing and Flap Valve Installation

Specific steps for installing in housings and adjusting the flap valve.

Final Assembly and Features

Fixing the Ventilator Insert

How to secure the ventilator unit in place using screws and clamps.

Decor Plate Assembly

Instructions for attaching the front cover plate and filter.

Motion Detector Circuit Board Fitting

Steps to connect the motion detector board to the decor plate.

Wiring Diagrams

Operation Modes Wiring

Provides wiring for various operational modes like one-step, continuous, and run-out time.

Movement Detector Wiring

Specific diagrams for ventilators equipped with motion detectors.

Advanced Functions

Humidity Control Operation

Explains operation and wiring for humidity-controlled ventilators.

Two-Room Ventilator Operation

Wiring and operation details for two-room ventilator configurations.

Settings and Maintenance

Run-out Time Setting

How to configure run-out times and other operational settings.

Filter Change and Cleaning

Instructions for replacing and cleaning the filter.

Accessory and Replacement Parts

Lists available accessories and spare parts with order numbers.

Lunos Skalar Series Specifications

General IconGeneral
BrandLunos
ModelSkalar Series
CategoryFan
LanguageEnglish

Related product manuals