CDA3000 Operation Manual
4-13
4 Commissioning
DE
EN
FR
IT
ES
FR
1
2
3
4
5
A
Download data set from
S
MARTCARD to next inverter
Note: Data set is automatically stored in inverter module.
Step Action Note Presentation
1
Connect the KEYPAD to the inverter module of the
next drive, insert the S
MARTCARD with the desired
data set and switch on the power.
2
Select the CARD menu.
= load/save with
S
MARTCARD
3
Choose READ. = Load data set
4
Choose ALL and start the
load operation with the
start/enter key.
= Complete data set
is loaded
5
READY appears.
= Load operation
completed without
error
Repeat this procedure on each of the other drives.
CARD
CARD
CARD
CARD
CARD
start
enter
start
enter
start
enter
stop
return
stop
return
To Next Page
Loading...
