Need help?Do you have a question about the Lust CDA3000 and is the answer not in the manual?
General| Cooling Method | Forced air cooling |
|---|---|
| Control Method | V/F control, Sensorless Vector Control |
| Protection | Overcurrent, Overvoltage, Undervoltage, Overheat, Short circuit |
| Communication | Modbus |
| Operating Temperature | -10°C to +50°C |
| Humidity | 5% - 95% RH, non-condensing |
| Altitude | Up to 1000m (derating above 1000m) |
| Input Voltage | 3-phase 380-480VAC ±10% |
Essential safety instructions and precautions for handling the inverter.
Defines the proper applications and compliance requirements for the inverter.
Outlines the user's responsibility for safe system integration and operation.
Important considerations for environmental conditions and device protection during installation.
Diagram and explanation of all external electrical connections to the inverter.
Procedures for proper grounding to ensure safety and EMC compliance.
Guidelines for connecting the motor, including shielded cables and PTC sensor wiring.
Instructions for connecting the inverter to the power supply, including filters and protection devices.
Helps select the correct commissioning mode based on the application requirements.
Details the specific function sequences the inverter performs when a fault occurs.
Lists fault codes, their causes, and recommended remedies for troubleshooting.
Methods for resetting the inverter module to factory defaults or specific settings.
To Next Page
