Lust CDA34.017 User Manual

D
CDA3000
Inverter Drive System
375 W - 90 kW
DE
EN
FR
IT
ES
Operation Manual
Betriebsanleitung
Manuel d’utilisation
Istruzioni di esercizio
Instrucciones de servicio
Umrichtersystem
Système variateur
Sistema invertitore
Sistema de convertidor

Lust CDA34.017 Specifications

General

Brand	Lust
Model	CDA34.017
Category	Inverter Drive
Language	English

Summary

Safety

1.1 Measures for Your Safety

Details important safety precautions for handling inverter drives.

Electrical Installation

3.1 Overview of Connections

Illustrates the main connection points and their functions for electrical setup.

3.2 Grounding Lead Connection

Details the correct procedures for grounding leads to ensure safety and EMC.

3.3 Motor Connection

Explains how to properly connect the motor phases, PTC, and shielding.

3.4 Mains Connection

Provides instructions for connecting the inverter to the AC mains power supply.

3.7 Control Terminals

Introduction to wiring and configuring control signals and terminals.

3.7.1 Choice of Terminal Assignment

3.7.2 Specification of Control Terminals

3.7.3 Terminal Assignment 1

3.7.4 Terminal Assignment 2

3.7.5 Terminal Assignment 3

3.7.6 Terminal Assignment 4

Commissioning

4.1 Choice of Commissioning

Guides users in selecting the appropriate commissioning mode for their application.

4.2 Serial Commissioning

Steps for efficiently commissioning multiple identical inverter drives.

4.3 Voltage Frequency Control (VFC)

Commissioning procedure for VFC control mode, standard for traction drives.

4.4 Sensorless Flux Control (SFC)

Commissioning for SFC mode, adapting the inverter to the motor without sensor.

4.5 Field-Oriented Regulation (FOR)

Commissioning for FOR mode, utilizing encoder feedback for precise control.

4.6 Operation with KEYPAD KP200

4.7 Operation with DRIVEMANAGER

4.8 Parameter List (Selection)

Diagnosis and Fault Rectification

5.1 LEDs Status

5.2 Fault Response

5.3 Fault Signals

Identifies fault codes, causes, and recommended remedies for troubleshooting.

5.7 Reset Procedures