Lutron Electronics LRF2-OCR2B-P-WH - Lens Masking

Ceiling
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Radio Powr SavrTM Wireless Occupancy/Vacancy Sensor
369480g 6 10.31.14
Lens Masking
Whenever possible, the sensor should be installed in a
location where it cannot view areas outside the intended
space, such as hallways or adjacent rooms. If this
situation cannot be avoided, portions of the lens may be
masked to block the view of the sensor into undesired
areas. Ten (10) PIR Lens Masks may be purchased in the
kit, L-CMDPIRKIT.
Lens sections
shown in white are
masked with labels
Lens sections
shown in gray
are not masked
PIR Lens Mask
sold separately
(L-CMDPIRKIT)
Hallway falls within
Sensor’s coverage area.