Tools required:
Tape Measure 1/4 in Hex-Head Driver
Wire Cutter/Stripper Level
Pliers Power Drill
#2 Phillips® Screwdriver
Box contents:
(1) Sivoia QS roller 100
(2) Pocket sub-brackets
Left and right side shade bracket (attached)
(1) 4 pin terminal block
(2) 4 in (102 mm) cable ties
(2) Extra retaining screws (#6 x 1/4 in (#6 x 6 mm)
Phillips® head screws
(1) Pocket, (1) flap and (2) end caps (if applicable)
(8) Mounting screws
(#8 x 1.75 in (#8 x 44 mm) Hex headscrews)
(2) 7 in (178 mm) cable ties
Sivoia® QS
|
roller 100TM pocket mount
Installation instructions
(Actual size)
(Actual size)
Page 1
Sivoia® QS roller 100TM Pocket Mount Installation instructions
To Next Page
Loading...