CONNECT AND SETUP THE HUB
11
STEP 6 CONNECT AND SETUP
THE HUB
If you have not purchased a Hub please proceed to ‘Additional
Actions’ on page 15 to proceed with your installation.
6.1
CONNECT THE HUB TO YOUR
HOME NETWORK ROUTER
6.2
CHECK THE RANGE OF THE HUB
Your Hub should be able to reach each shade in the
house. Use your remote from the same location as your
Hub to operate your shades. If some shades do not
respond, add or relocate a repeater and check again.
6.3
CONNECT THE HUB TO YOUR
POWER OUTLET
To Next Page
Loading...
