REMOTE 2:
3.4
CLOSE THE COVER
REMOTE 1:
3.5
PRESS STOP FOR 6 SECONDS
(Keep pressing until the remote lights start blinking).
REMOTE 2:
3.6
PRESS STOP AND HOLD
REMOTE 1:
3.7
PRESS STOP AND HOLD
3.8
RELEASE STOP ON BOTH REMOTE 1 AND REMOTE 2
(As confirmation remote 2 will flash the group buttons).
3.9
IF THE BUTTONS ON REMOTE 2 ARE STILL FLASHING PRESS
STOP FOR 6 SECONDS
(Keep pressing until the flashing stops).
Do you have a third or fourth remote? Take one of the above Remotes and name it Remote 1. Take your third
Remote and name it Remote 2. Go to step 3.2 and proceed from there.
PAIRING REMOTES
6
To Next Page
Loading...
