Lycoming IO-360-N1A User Manual

IO-360-N1A Engine Installation and Operation Manual
© 2016 Avco Corporation. All Rights Reserved Service Document List
February 2016 Page iii
SERVICE DOCUMENT LIST
NOTICE: The following is a list of service documents referenced in or incorporated into the
information in this manual. Always refer to the latest revision of any service document
for changes or additional information.
Number
Incorporation
Date
Subject
S.B. 369
02/16
Engine Inspection after Overspeed
S.B. 480
02/16
I. Oil and Filter Change and Screen Cleaning
II. Oil Filter Screen Content Inspection
S.B. 533
02/16
Recommended Action for Sudden Engine Stoppage,
Propeller/Rotor Strike or Loss of Propeller/Rotor
Blade or Tip
S.I. 1009
02/16
Recommended Time Between Overhaul Periods
S.I. 1014
02/16
Lubricating Oil Recommendations
S.I. 1070
02/16
Specified Fuels
S.I. 1098
02/16
Propeller Flange Bushing Location
S.I. 1132
02/16
Magneto Drop-off
S.I. 1154
02/16
FAA Approved Starter and Alternators
S.I. 1241
02/16
Pre-oil the Engine Prior to Initial Start
S.I. 1409
02/16
Lycoming Engines P/N LW-16702, Oil Additive
S.I. 1427
02/16
Lycoming Reciprocating Engine Run-In and Oil
Consumption
S.I. 1443
02/16
Approved Slick Magnetos on Lycoming Engines
S.I. 1472
02/16
Removal of Preservative Oil from Engine
S.I. 1481
02/16
Factory Engine Preservation
S.I. 1505
02/16
Cold Weather Starting
S.I. 1528
02/16
Aircraft Engine Starter Recommendations
S.I. 1530
02/16
Engine Inspection in a Particulate Laden
Environment (Volcanic Ash, Sand, Dust, Airborne
Debris)
L 114
02/16
Reciprocating Engine and Accessory Maintenance
Publications
L180
02/16
Engine Preservation for Active and Stored Aircraft

Lycoming IO-360-N1A Specifications

General

Brand	Lycoming
Model	IO-360-N1A
Category	Engine
Language	English