EasyManua.ls Logo

Lyda 203E User Manual

Lyda 203E
55 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
FOREWORD
Thank you for purchasing 250 ATV. This manual includes important safety information. It provides information about special techniques and skills necessary to
ride this vehicle. It also includes the details to operate and necessary maintenance procedure to perform safety.
IMPROTANT SAFETY MESSAGE:
PAY ATTENTION TO THE CAUTION AND WARNING LABELS ON THIS ATV.
READ THIS MANUAK BEFORE OPERATING THIS ATV.MAKE SURE YOU UNDERSTAND ALL INSTRUCTION. ALSO KEEP ALL INFORMATION IN MIND WHILE
OPERATING THIS ATV.
RIDING ACCORDING TO LOCAL RIPING LAW AND REGULATIONS
KEEP THIS MANUAL IN THE WATEPROOF PLACTIC BAG AND STORED IN THE COMPARTMENT PROVIDED BY YOU ATV.
FAILURE TO FOLLOW THE WARNINGS CONTAINED IN THIS MANUAL CAN RESULT IN SERIOUS INJURY DEATH.
NEVER CARRY A PASSENGER ON THIS ATV

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Lyda 203E and is the answer not in the manual?

Lyda 203E Specifications

General IconGeneral
BrandLyda
Model203E
CategoryOffroad Vehicle
LanguageEnglish

Summary

Foreword

Important Safety Message

Key safety instructions and warnings for operating the ATV.

Important Notice to Parents and Adults

Child Operation Safety

Guidelines for adult supervision and age-appropriate operation of ATVs by children.

Safety Symbols and Definitions

Understanding Safety Indicators

Explanation of Hazard, Warning, Caution, and Note symbols used in the manual.

General Safety Information

ATV Operation Hazards

Overview of potential hazards and risks associated with ATV operation.

Location of Labels

Warning and Specification Labels

Identifying and understanding the various labels on the ATV.

Vehicle Identification

Identifying Your ATV

Information on vehicle and engine identification numbers for reference.

Control Functions Overview

Main Switch and Indicator Lights

Explanation of the main switch positions and indicator lights functionality.

Handlebar Switches

Headlight and Engine Stop Switches

Operation of headlight, engine stop, and start switches.

Throttle Lever Operation

Accelerate and Decelerate Control

Proper use of the throttle lever for acceleration and deceleration.

Front Brake Lever Adjustment

Rear Brake and Parking Brake

Rear Brake Operation

Using the rear brake lever and pedal, and the parking brake.

Gear Shift Pedal Operation

Semi-Automatic Transmission

Operation of the 4-speed semi-automatic transmission and gear shifting.

Fuel Cock Operation

Pre-Operation Inspection

Inspection Checklist

Checklist of points to inspect before using the ATV.

Operation Procedures

Starting a Cold Engine

Step-by-step guide for starting a cold ATV engine.

Starting Out and Accelerating

Shifting and Acceleration Techniques

Procedures for starting movement, shifting gears, and accelerating.

Engine Break-in and Parking

Engine Break-in Period

Guidelines for the critical initial hours of engine operation to ensure longevity.

Ride With Care and Judgment

General Riding Instructions

Essential advice for safe and responsible ATV operation.

Rider Safety and Apparel

Protective Gear and Riding Restrictions

Recommended protective gear and rules for rider age and passengers.

Be Careful Where You Ride

Riding Environment Precautions

Advice on riding in specific areas and avoiding terrain hazards.

Turning Your ATV

ATV Turning Techniques

Essential techniques for safely turning the ATV, especially at low speeds.

Riding Downhill and Crossing Slopes

Downhill Riding Techniques

How to ride downhill safely, including weight distribution and gear selection.

Periodic Maintenance and Adjustment

Maintenance and Adjustment Overview

Importance of periodic checks, adjustments, and lubrication for machine efficiency.

Engine and Gear Oil Service

Oil Level Measurement and Replacement

How to check and maintain the engine oil and final gear oil levels.

Spark Plug Inspection

Spark Plug Condition and Gap

Inspecting the spark plug for condition and adjusting the electrode gap.

Air Filter Maintenance

Air Filter Cleaning and Replacement

Procedures for cleaning and replacing the air filter element.

Brake System Adjustments

Brake Lever and Pedal Free Play

How to adjust the free play of the front brake lever and rear brake pedal.

Cleaning and Storage

Machine Cleaning Procedures

Steps for thorough cleaning and protecting the ATV's surfaces.

Long-Term Storage Preparation

Storage Procedures

Steps to prepare the ATV for extended periods of non-use.

Vehicle Specifications

Dimensions and Engine Details

Technical specifications for model dimensions, engine type, and displacement.

Lubrication Systems and Capacities

Fluid Capacities and Load Limits

Information on lubrication systems, fluid capacities, and maximum load capacity.