27
PRE-OPERATION INSPECTION
Always check the following points before using this ATV
：
INSPECTION ITEM INSPECTION PROCEDURE
Brakes
●
Check the operation, condition and free play.
●
Adjust if necessary
Fuel
●
Check the fuel level.
●
Fill fuel if necessary.
Engine oil
●
Check the engine oil lever.
●
Fill the engine oil if necessary.
Final gear oil
●
Check for leakage.
Throttle
●
Check for proper operation of throttle cable.
Battery
●
Check the level of fluid
Switches
●
Fill distilled water if necessary.
●
Check all switches
Fittings and Fasteners
●
Check all fittings and fasteners
Wheels and Tires
●
Check tire pressure, wear and damage.
To Next Page
Loading...