Install
4. Install side brush
Let the left brush (L) and the right brush (R) correspond to the
letters L and R on the bottom shell respectively. Press down
and hear "click" to indicate that the installation is in place.
Note:
Sunlight will interfere with the return signal, which may cause the host to fail to return
the dust collector bin. Ensure that the dust collector has more than 0.5 meters on both
sides, and the power cord of the space more than 1.5 meters in front of the dust collector
is hanging down to the ground, which may be dragged by the host to causing the dust
collector bin to lose power.
2.Place the dust collection treasure against the wall, and ensure that there are no obstacles within 0.5 meters on both
sides and 1.5 meters in front. Please wrap the excess wire around the winding board and plug it in.
3.Before use, please first put the host on the dust
collection treasure to charge, full before use.
Adjacent to wall
0.5m
0.5m
1.5m
To Next Page
Loading...
